HYPERCELL® Grounding kits
ACOME recommends three
grounding kits per feeder run.
One kit is required at the top,
one at the bottom of the run,
(plus one at 50 meters interval
where applicable) and one at
entrance to the equipment
shelter.
Grounding kits, which have been
specially tailored to each cable
size, can be installed very easily
and rapidly; once the jacket is
stripped at the required dimen-sion,
one kit can be installed in less than 3 minutes.
Kits are provided with all hardware necessary to connect
the ground wire to the tower ground bar.
For Standard Grounding kits, the stainless steel shell
ensures high resistance to corrosion and the rubber
gasket guarantee an IP67 waterproofing level. The solid
copper contact (resistance < 1m) have been tested
according to MIL STD 1757 providing high protection
against lightning.
|
|
The Compact grounding
kits have been tested
and present a low
contact resistance of
2x10 -5 
They have been
tested to wistand
6.000/Volts/150.000
Amps during 50.s.
The cocoon style UV
resistant rubber shell
once correctly installed will allow an IP 68 waterproofing
index (1m/24h) with no need of any additional protection.
|
Accessories
Sitemap